Sectional Garage Doors

We install Hormann garage doors in the Cheshire and North Wales area. See our Blog for our experience in these doors.

 

Sectional doors open vertically upwards and are suspended under the ceiling to save space. This construction principle means you can make full use of the space inside and in front of the garage. Sectional garage doors can be fitted in any garage opening and offer up to 14 cm more passage width than up and over doors. They are also optimally sealed with flexible and weather-resistant seals on all four sides.

 

 

Specifications

Made in Germany; 5 year warranty on controls

100% of energy used in manufacture from green sources

LPU 42has a U Value of 1.5 W / m2K for the entire door composition

42mm / 67mm section thickness, steel leaf with thermal break

488mm uniformly spaced steel sections

Mechanical anti-lift kit burglary resistance

Award winning BiSecur hand transmitters

Colour Range

For steel sectional doors, you can choose from 15 equally-priced colours, approx 200 RAL colours, and 6 woodgrain finishes. The door surfaces are optimally protected against rust, allowing you to enjoy your new door for a long time. Rain runs off without leaving any streaky marks thanks to the use of hot-galvanised material and high quality polyester-primer coating on both sides.

Solid timber doors are available in two types of timber, each of which can be glazed in one of 8 colours to match your home.

Highest Security and Safety

Hormann sectional doors are tested and certified in accordance with the high safety requirements of European standard 13241-1, not only on their own but also in combination with electrical operators. It would be hard to find a safer sectional door.

Explanations

Track Applications

N - Normal track application

L - Low headroom track application

 

Ordering sizes

LDB - Clear passage width

LDH - Clear passage height

LZ - Clear frame dimensions

RM - Grid height

W - Overall length with operator

DE - Ceiling height

GIM - Inside garage dimension

ET - Distance back

OFF - Finished floor level

 

Track application N:

Manual operation > RM + 220mm

with operator / motor > RM + 235mm

 

Track application L:

Manual operation > RM + 125mm

with operator / motor> RM + 125mm